These trees are widely known by the common name tulip tree or tuliptree for their large flowers superficially resembling tulips. It is sometimes referred to as tulip poplar or yellow poplar, and the wood simply as "poplar", although not closely related to the true poplars. Other common names include canoewood, saddle-leaf tree, and white wood.
Various extinct species of Liriodendron have been described from the fossil record.
Liriodendron chinense twig with flowers. Notice that the orange pigment characteristic of L. tulipifera petals is absent.
Description
Liriodendron trees are easily recognized by their leaves, which are distinctive, having four lobes in most cases and a cross-cut notched or straight apex. Leaf size varies from 8–22cm long and 6–25cm wide. They are deciduous in the vast majority of cases for both species; however, each species has a semi-deciduous variety at the southern limit of its range in Florida and Yunnan respectively.[8] The tulip tree is often a large tree, 18–60 m high and 60–120cm in diameter. The stoutest well-authenticated Tulip tree was the Liberty Tree in Maryland which was 21.5 feet (6.6 meters) in circumference.[9] It died in 1999. The tree is known to reach the height of 191.8 feet (58.5 meters),[10] in groves where they compete for sunlight, somewhat less if growing in an open field. Its trunk is usually columnar, with a long, branch-free bole forming a compact, rather than open, conical crown of slender branches. It has deep roots that spread widely.[11][full citation needed]
Leaves are slightly larger in L. chinense, compared to L. tulipifera, but with considerable overlap between the species; the petiole is 4–18cm long. Leaves on young trees tend to be more deeply lobed and larger in size than those on mature trees. In autumn, the leaves turn yellow, or brown and yellow. Both species grow rapidly in rich, moist soils of temperate climates. They hybridize easily, producing L. x sinoamericanum cultivars.[citation needed]
Flowers are 3–10cm in diameter and have nine tepals — three green outer sepals and six inner petals which are yellow-green, with an orange flare at the base in L. tulipifera and L. x sinoamericanum. They start forming after around 15 years and are superficially similar to a tulip in shape, hence the tree's name. Flowers of L. tulipifera have a faint cucumber odor. The stamens and pistils are arranged spirally around a central spike or gynaecium; the stamens fall off, and the pistils become the samaras. The fruit is a cone-like aggregate of samaras 4–9cm long, each of which has a roughly tetrahedral seed with one edge attached to the central conical spike and the other edge attached to the wing.[citation needed]
Tulip tree barkTulip tree flowerTulip trees can be very large. This 130-footer in Pennsylvania with a 5-foot trunk dwarfs a group of mature oaks and maples.
Cytology
The chromosome count of Liriodendron chinense is 2n = 38.[12]
Taxonomy
It was described by Carl Linnaeus in 1753 with Liriodendron tulipiferaL. as the type species.[13][3]
The generic name Liriodendron is derived from lirio- meaning lily and -dendron meaning tree.[17]
Distribution
Liriodendron trees are also easily recognized by their general shape, with the higher branches sweeping together in one direction, and they are also recognizable by their height, as the taller ones usually protrude above the canopy of oaks, maples, and other trees—more markedly with the American species. Appalachian cove forests often contain several tulip trees of height and girth not seen in other species of eastern hardwoods.[citation needed]
In the Appalachian cove forests, trees 150 to 165ft in height are common, and trees from 166 to nearly 180ft are also found. More Liriodendron over 170ft in height have been measured by the Eastern Native Tree Society than for any other eastern species. The current tallest tulip tree on record has reached 191.9ft, the tallest native angiosperm tree known in North America.[18] The tulip tree is rivaled in eastern forests only by white pine, loblolly pine, and eastern hemlock. Reports of tulip trees over 200ft have been made, but none of the measurements has been confirmed by the Eastern Native Tree Society. Most reflect measurement errors attributable to not accurately locating the highest crown point relative to the base of the tree—a common error made by the users employing only clinometers/hypsometers when measuring height.[citation needed]
Maximum circumferences for the species are between 24 and 30ft at breast height, although a few historical specimens may have been slightly larger. The Great Smoky Mountains National Park has the greatest population of tulip trees 20ft and over in circumference. The largest-volume tulip tree known anywhere is the Sag Branch Giant, which has a trunk and limb volume approaching 4,000ft3 (110m3).[citation needed]
Paleo history
Liriodendrons have been reported as fossils from the Late Cretaceous and early Tertiary of North America and central Asia. They are known widely as Tertiary-age fossils in Europe and well outside their present range in Asia and North America, showing a once-circumpolar northern distribution. Like many "Arcto-Tertiary" genera, Liriodendron apparently became extinct in Europe due to the east-west orientation of its mountains that blocked southward migration during the large-scale glaciation and aridity of climate during glacial phases.[19]
Tulip trees serving an ornamental role in Vancouver.
Liriodendron trees prefer a temperate climate, sun or part shade, and deep, fertile, well-drained and slightly acidicsoil. Propagation is by seed or grafting. Plants grown from seed may take more than eight years to flower. Grafted plants flower depending on the age of the scion plant.[citation needed]
The wood of the North American species (called poplar or tulipwood) is fine grained and stable. It is easy to work and commonly used for cabinet and furniture framing, i.e. internal structural members and subsurfaces for veneering. Additionally, much inexpensive furniture, described for sales purposes simply as "hardwood", is in fact primarily stained poplar. In the literature of American furniture manufacturers from the first half of the 20th century, it is often referred to as "gum wood". The wood is only moderately rot-resistant and is not commonly used in shipbuilding, but has found some recent use in light-craft construction. The wood is readily available, and when air dried, has a density around 24lb/cuft (0.38g/cm3).[citation needed]
The name canoewood probably refers to the tree's use for construction of dugout canoes by eastern Native Americans, for which its fine grain and large trunk size is eminently suited.[citation needed]
↑Linné, Carl von, & Salvius, Lars. (1753). Caroli Linnaei ... Species plantarum :exhibentes plantas rite cognitas, ad genera relatas, cum differentiis specificis, nominibus trivialibus, synonymis selectis, locis natalibus, secundum systema sexuale digestas... (Vol. 1, p. 535). Impensis Laurentii Salvii. https://www.biodiversitylibrary.org/page/358554
Wikimedia Commons has media related to Liriodendron.
Hunt, D. (ed). 1998. Magnolias and their allies. International Dendrology Society & Magnolia Society. (ISBN0-9517234-8-0)
Parks, C.R., Wendel, J.F., Sewell, M.M., & Qiu, Y.-L. (1994). The significance of allozyme variation and introgression in the Liriodendron tulipifera complex (Magnoliaceae). Am. J. Bot. 81 (7): 878-889 abstract and first page
Parks, C.R., Miller, N.G., Wendel, J.F. and McDougal, K.M. (1983). Genetic diversity within the genus Liriodendron (Magnoliaceae). Annals of the Missouri Botanical Garden 70 (4): 658-666 abstract and first page
Collingwood, G.H., Brush, W.D. (1984) Knowing your trees. American Forestry Association. (L.O.C. card no. 78–52994):286-287